Λίστα Προβλημάτων σε συναγερμούς DSC neo
Όταν ανάψει η ενδειξη TROUBLE (τριγωνο εικονιδιο ) πατήστε * 2 για να δείτε το πρόβλημα του συστήματος
| 1 |
Πρόβλημα συστήματος πατήστε το 1 για να δείτε αναλυτικά |
[01] Bell Circuit Trouble: The bell circuit is open. [02] RF Jam: The HSM2HOSTx has detected an RF Jam condition. [03] Aux Supply Trouble: The alarm controller, HSM2204 or HSM2300 has an overcurrent condition on Aux. [04] Loss of Clock: System time and date require programming. [05] Output 1 Fault: An HSM2204 module has detected an open condition on output #1 |
| 2 | Πρόβλημα τροφοδοσίας πατήστε το 2 για να δείτε αναλυτικά | [01] Panel Low Battery Trouble: The battery voltage (under load) is below 11.5V. Restores at 12.5V. [02] Panel No Battery: No battery connected to alarm controller. [04] HSM2204 01 - 04 Low Battery: An HSM2204 has a battery voltage less than 11.5V. [05] HSM2204 01 - 04 No Battery: No battery connected to HSM2204. [07] HSM2300 01 - 04 Low Battery: An HSM2300 has a battery voltage less than 11.5V [08] HSM2300 01 - 04 No Battery: No battery connected to HSM2300. |
| 3 | Πρόβλημα bus:πατήστε το 3 για να δείτε αναλυτικά | [01] HSM2HOSTx Bus Low Voltage: The HSM2HOSTx module has measured less than 6.3V on its Aux input. [02] Keypad 01 - 16 Bus Low Voltage: A hardwired keypad has a bus voltage of less than 6.9V for ICON/LCD (RF version) and 7.7V for non-RF models. [04] HSM2108 01 - 15 Bus Low Voltage: A zone expander has a bus voltage of less than 5.9V. [05] HSM2300 01 - 04 Bus Low Voltage: A power supply has a bus voltage of less than 6.9V. [06] HSM2204 01 - 04 Bus Low Voltage: A high current output module has a bus voltage of less than 6.9V. [08] HSM2208 01 - 16 Bus Low Voltage: The low current output module has detected a voltage less than 5.9V on its aux input. [09] HSM2955 Bus Low Voltage: The audio module has detected a voltage less than 9.65V on its aux input |
| 4 | Πρόβλημα AC πατήστε το 4 για να δείτε αναλυτικά | [01] Zone 001 - 128 AC Trouble: An AC trouble has been detected on a PGX934 PIR + Camera. [03] Siren 01 - 16 AC: A siren has an AC trouble. [04] Repeater 01 - 08 AC: A wireless repeater has an AC trouble. [05] HSM2300 01 - 04 AC: An HSM2300 has an AC trouble. [06] HSM2204 01 - 04 AC: An HSM2204 has an AC trouble. [07] Panel AC: The alarm controller has an AC failure condition. |
| 5 | Απώλεια επίβλεψης συσκευής πατήστε το 5 για να δείτε αναλυτικά | [01] Zone 001 - 128: A zone is in fault. Additional information displayed on LCD keypads for the following troubles: Fire Trouble (2-W Smoke, PGX916, PGX926), Freeze (PGX905), Self Test (PGX984), CO (PGX913), and Probe Disconnected (PGX905). Also generated by a short on hardwired zones when DEOL is used or by a wireless supervisory fault. [02] Keypad 01 - 16: A wireless or hardwired keypad is in fault. [03] Siren 01 - 16: A siren is in fault. [04] Repeater 01 - 08: A wireless repeater is in fault (supervisory or loss of AC/DC) |
| 6 | Χαμηλή μπαταριά σε κάποια συσκευή πατήστε το 6 για να δείτε αναλυτικά | [01] Zone 001- 128: Wireless zone has a low battery. [02] Keypad 01-16: Keypad has a low battery. [03] Siren 01 - 16: Siren has a low battery. [04] Repeater 01 - 08: Repeater has a low battery. [05] User 01 - 1000: Wireless Key has a low battery. |
| 7 | Πρόβλημα Tamper συσκευής πατήστε το 7 για να δείτε αναλυτικά | [01] Zone 001 - 128 Tamper: A wireless or hardwired zone configured for DEOL operation is in tamper. [02] Keypad 01 - 16 Tamper: A hardwired or wireless keypad is in tamper. [03] Siren 01 - 16 Tamper: A wireless siren is in tamper. [04] Repeater 01 - 08 Tamper: A wireless repeater is in tamper. [05] Audio Station 01 - 04 Tamper: An audio station connected to an HSM2955 is in tamper |
| 8 |
Πρόβλημα παραβίασης συχνότητας RF πατήστε το 8 για να δείτε αναλυτικά |
[01] Zone 001 - 128 RF Delinquency: No response from a wireless zone for 13 minutes. This trouble prevents arming until acknowledged or cleared using [*][2]. [02] Keypad 01 - 16 RF Delinquency: No response from a wireless keypad for 13 minutes. [03] Siren 01 - 16 RF Delinquency: No response from a wireless siren for 13 minutes. [04] Repeater 01 - 16 RF Delinquency: No response from a wireless repeater for 13 minutes. |
| 9 | Απώλεια επίβλεψης συσκευής πατήστε το 9 για να δείτε αναλυτικά | 01] HSM2HOSTx not responding. [02] Keypad 01 - 16 not responding. [04] HSM2108 01 - 15 not responding. [05] HSM2300 01 - 04 not responding. [06] HSM2204 01 - 04 not responding. [08] HSM2208 01 - 16 not responding. [09] HSM2955 is not responding. |
| 10 | Πρόβλημα Tamper συσκευής πατήστε το 10 για να δείτε αναλυτικά | [01] HSM2HOSTx Tamper. [02] Keypad 01 - 16 Tamper. [04] HSM2108 01 - 15 Tamper. [05] HSM2300 01 - 04 Tamper. [06] HSM2204 01 - 04 Tamper. [08] HSM2208 01 - 16 Tamper. [09] HSM2955 Tamper |
| 11 | Πρόβλημα επικοινωνίας πατήστε το 11 για να δείτε αναλυτικά | 01] TLM: Telephone line disconnected from control panel. [02] Receiver 01-04 FTC Trouble: Failure to communicate using programmed receiver paths. [03] Alt. Comm SIM Lock: SIM card has incorrect or unrecognized PIN. [04] Alt. Comm Cellular: Radio or SIM card failure, low signal strength detected, or cellular network fault. [05] Alt. Comm Ethernet: Ethernet connection unavailable. A valid IP address is either not programmed or the module was unable to get an IP with DHCP. [06] Receiver 01-04 Absent: Alternate communicator unable to initialize a receiver. [07] Receiver 01-04 Supervision: Alternate communicator unable to communicate with a receiver. [09] Alt. Comm Fault: The alternate communicator has stopped responding. [10] Alt Comm FTC Trouble: The alternate communicator has failed to communicate an internal event not generated by the panel |
| 12 | Not Networked Troubles: | [01] Zone 001-128 Not Networked Trouble: Generated when a zone becomes out of sync with the wireless network or has not been synchronized with the network after enrollment. [02] Keypad 01-16 Not Networked Trouble: Generated when a keypad becomes out of sync with the wireless network or has not been synchronized with the network after enrollment. [03] Siren 01-16 Not Networked Trouble: Generated when a siren becomes out of sync with the wireless network or has not been synchronized with the network after enrollment. [04] Repeater 01-08 Not Networked Trouble: Generated when a repeater becomes out of sync with the wireless network or has not been synchronized with the network after enrollment. [05] User 01 - 1000 Not Networked Trouble: Generated when a wireless key becomes out of sync with the wireless network or has not been synchronized with the network after enrollment. |
Αρχεία για συστήματα ασφάλειας
Απο έμπειρους τεχνικούς
Με άρθρα οδηγίες εγχειρίδια